Wood Shop

The wood shop is a 975 square foot space. It contains a table saw, radial arm miter saw, planer, jointer, drill press, bandsaw, scroll saw, oscillating spindle sander, combination belt and disc sander, lathe, and other hand tools. It also contains a large CNC router. The shop is also equipped with compressed air quick connections for powering tools and machines. There are two air filtration units located up high in the ceiling. When producing wood dust turn on the filtration units with the white remote control. Theses do a good job of removing a large percentage of the wood dust from the air.

The Wood Shop

The current Ace of the Wood Shop is Needed (Makerhub@georgefox.edu).

Equipment Overview

Name	Company	Model	Current Ace ⠉
Belt Sander	Rigid	R2740	Needed
Belt/Disc Sander	PowerMatic	BD31A	Needed
CNC Router	Laguna	SmartShop II	Luke Roderick
Compound Miter Saw	Dewalt	DWS780	Needed
Hand Router	Porter Cable	8902	Needed
Handheld CNC Router	Shaper	S01-NN Origin	Needed
Jointer	Powermatic	54HH	Needed
Oscillating Spindle Sander	Grizzly Industrial	G1071	Needed
Planer	Powermatic	209HH-3	Needed
Power Carver	Foredom	SR - K5200 Deluxe	Needed
Router Table	SawStop/Bora Portamate Motor	RT-LFT 4-Post	Needed
Scroll Saw	Excalibur	EX-21	Needed
Table Saw	SawStop	PCS31230	Needed
Vertical Wood Bandsaw	Laguna	mband 14BX220-250	Needed
Wood Drill Press	Tekna Tool	Nova Voyager DVR	Needed
Wood Lathe	TeknaTool	Nova Galaxi DVR	Needed

3 commandments

1. Safety First

Safety First is the rule we hold highest of the three. This rule applies to both the safety of you as well as others

Keeping yourself safe in the Wood Shop is very important, as there are possibilities for accidents if you don't follow the safety guidelines. Safety starts with you so don't depend on others to keep you safe. There is a first aid kit located on the south wall near the Wood Shop door.
The following rules must be followed at all times.

All the same safety rules from the machine shop apply:

•  Safety glasses must be worn when crossing into the shop area marked on the floor.

• No horseplay in the shop.

• Don’t do anything distracting to yourself or others while operating machinery.

• Do not wear any loose clothing, jewelry, or landyards.

• No hats or open toed shoes.

• Hair will not extend bellow the collar.

• Do not wear gloves while operating machinery.

• Food or drink is allowed when not operating machinery and it is kept a safe distance away from the machines.

• Do not attempt to operate machinery in the shop that you have not been certified on by GFU engineering personnel.

• Do not argue with volunteers or shop staff. Contact Justin Johnson if you have issues that need to be resolved.

• Do not operate machinery without a shop supervisor or trained volunteer in the shop with you. Never operate equipment alone in the shop.

• Reset the space. Make the area you are working in ready for the next person using the dust broom and vacuum cleaner.

• The first aid kit is located in the machine shop, next to the wood shop doors.

• If you see a safety violation inform the person immediately and encourage them to comply with the policies

• Don’t do anything that would require an additional rule to be added to this list.

2. Reset the Space

The Wood Shop has a specific organization to it. Put whatever you use back where it belongs. There is a place for everything and everything has a place. This rule applies to everything in the space. If you use a tool, put it back. If you use a pen, put it back. Throw away your trash and recycling.

Now, we understand that sometimes you need to leave projects out. Maybe you are in the middle of a large project and you need something left overnight. In cases like this, it is okay, but you NEED to make prior arrangements with Nick or Justin.

Please put back the Machinery the way you found it. Clean up chips and any messes you make. NEVER use shop air to clean off yourself or the machines.

Always put any unused materials back on the storage shelf, and throw away unusable scrap.

Always leave the space better than you found it.

3. Be Professional

This commandment has two sides to it. It covers the idea of acting like professional (which Webster’s defines as “exhibiting a courteous, conscientious, and generally businesslike manner in the workplace”). The term also describes the standards of education and training that prepare members of the profession with the particular knowledge and skills necessary to perform their specific role within that profession. Hopefully, you are learning both of these as part of your education at George Fox University. In the Welding Lab we expect you to develop as a courteous, conscientious, and skilled craftsman, understanding the tools and equipment in the Maker Hub and how to use them effectively.

Being a professional has some obvious ramifications in terms of behavior. First, be Christlike. Think of others better than yourselves. Share. If you have been welding for a prolonged time and someone else is waiting for the machine, let them use the machine for a while. This is being a professional.

If you are learning to how to use a machine, and you can't get something to work the way you want - ASK SOMEONE! Learn! Become a professional. Learn the craft. This is an educational space. You might think it will be quick and you can just get it done “your” way and not learn how to do it correctly. Be a Professional and learn the proper way, and then be available to teach others.

One very important, and likely difficult part of being a professional is to correct others when they are not being professional. It is your responsibility to speak up when you see somebody doing something inappropriate. If you see somebody doing something unsafe, not resetting the space, or being unprofessional, the professional thing to do is to remind them of the three commandments and ask them politely to correct their action. This is OUR space, not any individual's. As a group, we expect everyone in the space to keep the space safe, clean, and operable for everyone. 

If someone acts disgracefully unprofessional to you in the Machine Shop, you are welcome to bring the issue to Justin or Nick's attention.

General Wood Shop Knowledge

Woodworking is dangerous. Be careful.

Gluing

Glue joints (when done correctly) will create a bond stronger than the wood itself. To create a strong glue joint follow this general procedure. It is worth noting that gluing end grain yields a very weak glue joint and should be avoided.

1. Ensure that both surfaces that you wish to glue are flat or mate together well.
2. Dry fit your glue joint with clamps. This will ensure that your joint fits properly and that all necessary clamps are close by and sized correctly when you go to apply glue.
3. You can never have too many clamps.
4. Get a handful of paper towels to help clean up glue squeeze out and the glue you will get on your fingers.
5. Recognize that once you start applying glue you are on a clock to finish setting up the glue joint before the set time.
6. Apply a bead of glue on one surface of your glue joint. Then, spread out that glue into a thin film using your fingers, a glue brush, or a glue roller.
7. Repeat step 5 for the other surface of your glue joint such that both surfaces have a thin, even film of glue.'
8. Quickly use a paper towel to wipe your fingers clean of glue. The goal here is to remove most of the wet glue so it doesn't get spread all over your lumber. Do NOT take the time to clean all of the glue.
9. Using the clamps you already gathered, clamp your glue joint together
10. You can never have too many clamps.
11. After 5-10 minutes, wipe up the excess glue squeeze out.

General Knowledge

• The Table Saw is the center of the shop because it is the most frequently used tool.

• Always inspect materials for nails or metal. Metal debris in wood will damage the equipment and possibly cause injury to you.
• Make sure the process you are using is correct for your material type.
• Get help handling larger pieces of wood.
• When making dust turn on the dust filtration units.
• You can't learn woodworking on a wiki page... Go to the wood shop and start making things!

Here are a couple things to keep in mind:

• Some wood dust can be toxic. Be aware of the type of wood you are working with.
• Blades and cutters are very sharp so always think before touching.
• Be aware of the location of your fingers in relation to blades and cutters. Never let your hands or finger come close to the blade path.
• Be aware of people and what they are doing around you.
• Be aware of what is on the floor around you. Don't trip on dust collector hoses or electrical cords.
• May of the machines that remove material are very load. Wear ear protection when needed.
• If something feels like it could be dangerous ask a supervisor before attempting.

• 

  Belt Sander 2

• 

  Disc Belt Sander

• 

  CNC router icon

• 

  Miter Saw

• 

  Hand Router

• 

  CNC Hand Router

• 

  Jointer icon

• 

  Spindle Sander

• 

  Planer icon

• 

  Power carverIcon

• 

  Router Table Icon 2

• 

  Scroll Saw

• 

  Table saw icon

• 

  Wood bandsaw icon

• 

  Wood drill press icon

• 

  Wood Lathe

Foxtale Certification

Before working with any of the equipment in the Wood Shop you will need to take the general lab quiz as well as the specific quiz for each machine you are trying to use. The enrollment code for all of the quizzes is MakerHub.