1,947
edits
Changes
Jump to navigation
Jump to search
Line 65:
Line 65: − 6. Keep the material moving to prevent too much heat in one spot.+ − 7. Keep sanding until you cut the material back to your line.+ − 8. When you are finished sanding power down the dust collector and sander.+ − 9. Make sure all motion has stopped before cleaning the machine. + − 10. Reset the space.+
→General Procedure
6. Place the material onto the table and slowly feed your material into the belt/disc. Make sure your hands/fingers are clear of making contact with any moving parts.
6. Place the material onto the table and slowly feed your material into the belt/disc. Make sure your hands/fingers are clear of making contact with any moving parts.
7. Keep the material moving to prevent too much heat in one spot.
8. Keep sanding until you cut the material back to your line.
9. When you are finished sanding power down the dust collector and sander.
10. Make sure all motion has stopped before cleaning the machine.
11. Reset the space.
==Safety==
==Safety==