1,956
edits
Changes
Jump to navigation
Jump to search
Line 63:
Line 63: − +
→General Procedure
5. Power on the dust collector and sander.
5. Power on the dust collector and sander.
6. Place the material onto the table and slowly feed your material into the belt/disc. Make sure your hands/fingers are clear of making contact with any moving parts.
6. Place the material onto the table and slowly feed your material into the belt/disc. Make sure your hands/fingers are clear of any moving parts.
7. Keep the material moving to prevent too much heat in one spot.
7. Keep the material moving to prevent too much heat in one spot.