1,947
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − Insert text+ + + + + + + + + + + + + + + + + + + + +
→General Procedure
====General Procedure====
====General Procedure====
1. Obtain a piece of scrap wood. If the work piece is too small it will be difficult to hold onto and create a dangerous situation by placing your fingers too close to the belt/disc.
2. Using a pencil or pen sketch a radius or line onto the edge of your material.
3. Make sure the belt and disc are in good shape and secure.
4. Connect the dust collector hose to the sander.
5. Power on the dust collector and sander.
6. Place the material onto the table and slowly feed your material into the belt/disc. Make sure your hands/fingers are clear of making contact with any moving parts.
6. Keep the material moving to prevent too much heat in one spot.
7. Keep sanding until you cut the material back to your line.
8. When you are finished sanding power down the dust collector and sander.
9. Make sure all motion has stopped before cleaning the machine.
10. Reset the space.
==Safety==
==Safety==