Software
Jump to navigation
Jump to search
This page provides a list of all of the software installed in the Maker Hub. If you migrate to the Wiki Page for each piece of software, you can find directions for installation of that software for machines within our network (including your personal machines if you are a student or employee).
| Web Page | Wiki Page | Description | Version |
|---|---|---|---|
 |
7-Zip | Software for compressing and unzipping files | 24.01 |
 |
Altium | PCB Design Software | 22.7.1 |
 |
Ansys | Engineering Design Analysis Software | 2022 R2 |
 |
ArcGIS | Professional GIS Application | 10.7 |
 |
Arduino | Arduino is an open-source electronics platform based on easy-to-use hardware and software. | 1.8.13 |
 |
CutStudio | Vinyl Cutter control software | 6 |
 |
EES | Engineering Equation Solver | 11.364 |
 |
Inkscape | Vector Graphics Software | 0.92 |
 |
Logic | Logic Analyzer Software | 2.3.44 |
 |
MATLAB | Programming and numeric computing platform | R2022a |
 |
MicrochipStudio | IDE for Atmel parts | 7.0 build 2542 |
 |
Modelsim | HDL Simulation Software | 2020.3-se |
 |
PTC | Mathcad Software | 8 |
 |
PrusaSlicer | Software for the Prusa mkIV 3D Printers | 2.7.1 |
 |
PyCharm | The Python IDE for Professional Developers | 2023.1 (Community Edition) |
 |
Python | Python is a programming language that lets you work quickly and integrate systems more effectively. | 3.12.1 |
 |
Solidworks | 3D Solid Modeling Software | 2022 SP02 |
 |
VersaWorks | Vinyl Printer/Cutter control software | 6 |
 |
Vivado | FPGA Design Software | 2024.1 |
 |
Waveforms | Software for the Digilent Analog Discovery 3 | 3.21.3 |