Changes

<br>

<br>

<br>

<br>

<strong>Step 10:</strong> This next step will be a lot easier if you select the plane and click on the Section View icon at the top of your drawing space. This will allow you to see a cross-section of the square column and select the enclosed area in the sketch easier. Click the green checkmark. SolidWorks often indicates enclosed areas in a sketch with darker shading as shown in the screenshot below (hence the darker triangle that we just drew).

<strong>Step 10:</strong> This next step will be a lot easier if you select the plane and click on the Section View icon at the top of your drawing space. This will allow you to see a cross-section of the square column and select the enclosed area in the sketch easier. Click the green checkmark. SolidWorks often indicates enclosed areas in a sketch with darker shading as shown in the screenshot below (hence the darker triangle that we just drew). While you are here, use the Smart Dimension tool to measure the angle as shown in the second screenshot below. You should get about 35.26 degrees. Remember this angle because we will need it when making cuts on the [[Vertical Wood Bandsaw|wood bandsaw]].

TW10

TW10