Changes

<strong>Step 6:</strong> A fillet will be used to achieve the rounded corners of our triangle. Select the “Sketch Fillet” command in the toolbar. This command creates a round corner between two lines. In the left panel, set the fillet parameter to have a radius of 12.7 mm (equivalent to our ½ die).  

<strong>Step 6:</strong> A fillet will be used to achieve the rounded corners of our triangle. Select the “Sketch Fillet” command in the toolbar. This command creates a round corner between two lines. In the left panel, set the fillet parameter to have a radius of 12.7 mm (equivalent to our ½ die).  

[[File:Triangle 9.png|300px|thumb]]

[[File:Triangle 9.png|300px|none]]

<br>

<br>