Changes

Jump to navigation Jump to search
Line 163: Line 163:  
<strong>Step 30:</strong> Click on the Plater tab in the top left corner and click Slice now in the bottom right corner. After PrusaSlicer finishes rendering, use the vertical slide bar on the right to step through each layer. You can zoom in/out with the scroll wheel and pan by clicking and holding the scroll wheel.
 
<strong>Step 30:</strong> Click on the Plater tab in the top left corner and click Slice now in the bottom right corner. After PrusaSlicer finishes rendering, use the vertical slide bar on the right to step through each layer. You can zoom in/out with the scroll wheel and pan by clicking and holding the scroll wheel.
   −
10
+
[[File:Egg 30.png|1500px|none]]
 
<br>
 
<br>
 
<br>
 
<br>
 
<strong>Step 31:</strong> If everything looks good, click Export G-code in the bottom right corner and save the G-code on an SD card. You are now ready to take the SD card to one of the Prusa 3D printers and begin your print (make sure the MK3/MK3S on the printer matches what you selected in PrusaSlicer).
 
<strong>Step 31:</strong> If everything looks good, click Export G-code in the bottom right corner and save the G-code on an SD card. You are now ready to take the SD card to one of the Prusa 3D printers and begin your print (make sure the MK3/MK3S on the printer matches what you selected in PrusaSlicer).
   −
11
+
[[File:Egg 31.png|1500px|none]]
 
<br>
 
<br>
 
<br>
 
<br>

Navigation menu