1,947
edits
Changes
Jump to navigation
Jump to search
Line 141:
Line 141: +
→Startup
*Make sure all of the axis are clear to move.
*Make sure all of the axis are clear to move.
*Select HOME and wait for the machine to move to the 0,0 position. You should never be on the machine side of the yellow/black tape on the floor when the machine is operating.
*Select HOME and wait for the machine to move to the 0,0 position. You should never be on the machine side of the yellow/black tape on the floor when the machine is operating.
*To manually load/unload a tool in the spindle you will need to press the green button on the left side of the spindle while holding onto the tool holder OD. To insert the tool press the button and slide the tool holder up into the spindle. To remove a tool press the button and tool will be ejected from the spindle. Do not allow your hands to make contact with the razor sharp cutting tool.
==== Material ====
==== Material ====