1,956
edits
Changes
Jump to navigation
Jump to search
Line 58:
Line 58: − + +
→General Procedure
You will need to demonstrate the safe setup and use of the belt/disc sander. You will be sketching an arc onto a piece of scrap material and sanding up to the line using the disc and belt. Make sure to keep the material moving to prevent burning and tearing of the sanding belt/disc.
You will need to demonstrate the safe setup and use of the belt/disc sander. You will be sketching an arc onto a piece of scrap material and sanding up to the line using the disc and belt. Make sure to keep the material moving to prevent burning and tearing of the sanding belt/disc.
====General Procedure====
====Operation====
[[File:Formech_Controls.JPG|none|thumb|600x600px]]
[[File:Formech_Controls.JPG|none|thumb|600x600px]]
== Operation ==
== Operation ==
* Place a mold into the tray and lower it.
* Place a mold into the tray and lower it.