80
edits
Changes
Jump to navigation
Jump to search
Line 57:
Line 57: − +
→General Procedure
# Turn on the spot welder
# Turn on the spot welder
# Place the material being welded between the clamps.
# Place the material being welded between the clamps.
# Clamp down on the two pieces of material for no more than 5 seconds.
# Clamp down on the two pieces of material for approximately 2 seconds. The time required to weld may vary slightly depending on the material and thickness.
# Grab workpiece with a set of pliers, and open the clamp.
# Grab workpiece with a set of pliers, and open the clamp.
<references />
<references />