479
edits
Changes
Jump to navigation
Jump to search
Line 61:
Line 61: + − Insert text+ Line 73:
Line 74: − + − + − + Line 113:
Line 114: − +
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
If a rivet is not connecting the top and bottom layer traces, it is probably not pressed well, meaning it is not making good contact with the trace on both layers. A well placed rivet gives a good connection that is resistant to bending and twisting. In order to obtain a good long-term stability, we recommend that you apply our SUR-TIN immersion tin. This will help to prevent corrosion at the transition layer of the rivet and the copper clad (and will increase solderability). If you place component leads in the rivet holes and solder them from one side only, you should avoid thermal stress to the rivet. Certainly if solder passes the rivet it can cause the rivet to grow under the heat so that the rivet becomes loose. In such case, you should solder fix both rivet collars to the pads before inserting component leads.
==Maintenance==
==Maintenance==
====General maintenance====
====General maintenance====
There is little to no maintenance to be done on this machine. Just be sure to reset the space, put away any rivets, tools, and PCBs that you have used.
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====
!Done By
!Done By
|-
|-
|Sample
|General Cleaning
|Sample
|Before and After each use, put away any rivets, tools, and PCBs that you have used
|Sample
|Student
|}
|}
<br /><br />
<br /><br />
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:through hole press chart snippet.PNG|750x750px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:through hole press chart snippet.PNG|750x750px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<br /><br />
<br /><br />