479
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + − − − {{#evu:http://www.bungard.de/index.phpoption=com_content&view=article&id=48&Itemid=65&lang=english}}
→Safety
There is not much that can hurt you while using the machine or the rubber mallet. Do not put any part of yourself under the through hole press, because it will try to punch a hole in you. The same idea goes with the mallet and the its tool. Do not swing it or do any dumb stuff. This should not have to be said, but people are dumb sometimes. Please do not be that person.
There is not much that can hurt you while using the machine or the rubber mallet. Do not put any part of yourself under the through hole press, because it will try to punch a hole in you. The same idea goes with the mallet and the its tool. Do not swing it or do any dumb stuff. This should not have to be said, but people are dumb sometimes. Please do not be that person.
As for the through hole press and its tools, there any many things that could damage it. Especially tools for small rivet diameter (0.4 and 0.6 mm) are sensitive and require careful handling. The tip of the upper tool and springloaded pin of the bottom tool may not be damaged. Avoid any excessive pressure on both parts! For transport reasons the tip of the lower tool may be hidden inside of the tool body. If so, carefully turn in the headless screw, until the tip shows up again, but still can be pushed into the body again. See also the video on our website for tool changes and adjustments:
As for the through hole press and its tools, there any many things that could damage it. Especially tools for small rivet diameter (0.4 and 0.6 mm) are sensitive and require careful handling. The tip of the upper tool and springloaded pin of the bottom tool may not be damaged. Avoid any excessive pressure on both parts! For transport reasons the tip of the lower tool may be hidden inside of the tool body. If so, carefully turn in the headless screw, until the tip shows up again, but still can be pushed into the body again.
==Certification==
==Certification==