Changes

Jump to navigation Jump to search
Line 141: Line 141:  
##Replace the burnishing pad back into the drawer
 
##Replace the burnishing pad back into the drawer
 
#''The Solder Paste''
 
#''The Solder Paste''
##At this time, retrieve the solder paste from the fridge and set it out to warm  
+
##At this time, retrieve the solder paste from the fridge and set it out to warm. The correct paste is labeled with a '''orange''' sticker.
##Take the board back to the Voltera
+
##Take the board back to the Voltera.
 
##Clamp the board into place.
 
##Clamp the board into place.
##Open the volteraapp and choose "Solder"
+
##Open the Voltera application and choose "Solder."
##Choose the proper paste, in this case you want the orange labeled paste
+
##Choose the proper paste. In this case you want the orange-labeled paste.
 
##'''NICK: we need to edit the gerber so that theres no solder paste on pads'''
 
##'''NICK: we need to edit the gerber so that theres no solder paste on pads'''
 
##'''Like before, clean the calibration switches'''
 
##'''Like before, clean the calibration switches'''
1,341

edits

Navigation menu