42
edits
Changes
Jump to navigation
Jump to search
Line 161:
Line 161: − + − + + + + + +
no edit summary
==== Changing Materials ====
==== Changing Materials ====
''*Only volunteers will change out materials. If the F370 runs out of filament or you would like to use a different color, please speak to a lab volunteer.*''
''*Only volunteers will change out materials. If the F370 runs out of filament or you would like to use a different color, please speak to a lab volunteer.*''
<br>
There are four material bays within the F370. The top drawer houses the material bays and their material drive controller, which feeds the filament from the bay to the head. The material drive controller detects whether material within the material drive within the material drive during the load and unload process and can also detect errors, when filament is broken, or when the end of the spool is reached. The print will be paused if any of these things occur so the print can be recovered and filament reloaded.
There are four material bays within the F370. The top drawer houses the material bays and their material drive controller, which feeds the filament from the bay to the head. The material drive controller detects whether material within the material drive within the material drive during the load and unload process and can also detect errors, when filament is broken, or when the end of the spool is reached. The print will be paused if any of these things occur so the print can be recovered and filament reloaded.
<br>
To install a new material spool;
# Select the '''Materials''' button from the touchscreen.
# Open the material bay drawer.
# Insert the material spool into its appropriate slot. In the Prototype Lab, the two bays on the left will contain model material, while the bays on the right will contain support material.
==== Settings ====
==== Settings ====