Changes

Tools - The last menu has various settings and functions for the printer. One of the icons in this menu will be a sun, which turns the light inside the printer on and off so a print can be viewed. Otherwise, do not mess with or change settings without speaking to a volunteer first.   

Tools - The last menu has various settings and functions for the printer. One of the icons in this menu will be a sun, which turns the light inside the printer on and off so a print can be viewed. Otherwise, do not mess with or change settings without speaking to a volunteer first.   

<figure-inline>[[File:F370 Touchscreen.jpg|560x560px]]</figure-inline>

<figure-inline><figure-inline>[[File:F370 Touchscreen.jpg|560x560px]]</figure-inline></figure-inline>

'''To start your print:''' The image above shows the home screen for the console. If a build plate is in place, the F370 has sufficient materials, and the correct tray is displayed, simply select "Print" and the print will begin.

'''To start your print:''' The image above shows the home screen for the console. If a build plate is in place, the F370 has sufficient materials, and the correct tray is displayed, simply select "Print" and the print will begin.

There are four material bays within the F370. The top drawer houses the material bays and their material drive controller, which feeds the filament from the bay to the head. The material drive controller detects whether material within the material drive within the material drive during the load and unload process and can also detect errors, when filament is broken, or when the end of the spool is reached. The print will be paused if any of these things occur so the print can be recovered and filament reloaded.

There are four material bays within the F370. The top drawer houses the material bays and their material drive controller, which feeds the filament from the bay to the head. The material drive controller detects whether material within the material drive within the material drive during the load and unload process and can also detect errors, when filament is broken, or when the end of the spool is reached. The print will be paused if any of these things occur so the print can be recovered and filament reloaded.

<br>

<br>

To install a new material spool;

To install a new material spool; (more detailed instructions found [http://www.stratasys.com/-/media/files/documentation/fdm/F123-Series/User-Guide/F123%20Series%20User%20Guide_d/ here] on page 109)

#  Select the '''Materials''' button from the touchscreen.  

#  Select the '''Materials''' button from the touchscreen.  

# Open the material bay drawer.

# Open the material bay drawer.

# Insert the material spool into its appropriate slot. In the Prototype Lab, the two bays on the left will contain model material, while the bays on the right will contain support material.

# Insert the material spool into its appropriate slot. In the Prototype Lab, the two bays on the left will contain model material, while the bays on the right will contain support material.

==== Settings ====

==== Settings ====