Changes

## Set the conductive ink on the table, allowing to begin to warm to room temperature.

## Set the conductive ink on the table, allowing to begin to warm to room temperature.

# ''Software Setup''

# ''Software Setup''

## Download the files for this project [[File:pcb_printer_level_1.zip|here]].

## Download the files for this project [[File:pcb_printer_level_1.zip|here.]]

## Power on the Voltera.

## Power on the Voltera.

## Open the Voltera Windows application.

## Open the Voltera Windows application.

## Select "Print" and then "Simple."

## Select "Print" and then "Simple."

## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.

## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.

## Load the ink file. This is the Top Layer Gerber file.  

## Load the ink file from the project files. This is the Top Layer Gerber file.  

## Click "Next."

## Click "Next."

# ''Cleaning the Sensors''

# ''Cleaning the Sensors''