1,341
edits
Changes
Jump to navigation
Jump to search
Line 76:
Line 76: + − +
→Level 1
## Set the conductive ink on the table, allowing to begin to warm to room temperature.
## Set the conductive ink on the table, allowing to begin to warm to room temperature.
# ''Software Setup''
# ''Software Setup''
## Download the files for this project [[File:pcb_printer_level_1.zip|here]].
## Power on the Voltera.
## Power on the Voltera.
## Open the Voltera Windows application.
## Open the Voltera Windows application.
## Select "Print" and then "Simple."
## Select "Print" and then "Simple."
## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.
## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.
## Load the ink file. This is the Top Layer Gerber file. Download it [[File:pcb_printer_level_1.zip|here]].
## Load the ink file. This is the Top Layer Gerber file.
## Click "Next."
## Click "Next."
# ''Cleaning the Sensors''
# ''Cleaning the Sensors''