124
edits
Changes
Jump to navigation
Jump to search
Line 31:
Line 31: + + + + + + + + + Line 72:
Line 81: − − ==Safety== − # Don’t feed anything into the blade you don’t want cut. First off, it makes no sense and it could pull other stuff into the midst, like your own body. That isn't a good scenario, so let's prevent that. − # Plan out your cut before making it. Wasting material isn't a good idea, and it's more time consuming when you mess up. − # Don't try to cut too tight of radius. See the blade curve chart before cutting curves. − # Use a push stick to keep your fingers at least 3" from the blade. − # Keep hands and fingers out of the "danger zone" in front of the blade. − # Hold work piece firmly on the table.
no edit summary
__TOC__
__TOC__
==Safety First==
[[File:Safety First HD2.png|left|150px]]
* Don’t feed anything into the blade you don’t want cut. First off, it makes no sense and it could pull other stuff into the midst, like your own body. That isn't a good scenario, so let's prevent that.
* Plan out your cut before making it. Wasting material isn't a good idea, and it's more time consuming when you mess up.
* Don't try to cut too tight of radius. See the blade curve chart before cutting curves.
* Use a push stick to keep your fingers at least 3" from the blade.
* Keep hands and fingers out of the "danger zone" in front of the blade.
* Hold work piece firmly on the table.
==Description==
==Description==
# Turn the machine off once the cut is complete.
# Turn the machine off once the cut is complete.
# Remove the workpiece and reset the space.
# Remove the workpiece and reset the space.
==Certification==
==Certification==