Changes

##Replace the burnishing pad back into the drawer

##Replace the burnishing pad back into the drawer

#''The Solder Paste''

#''The Solder Paste''

##At this time, retrieve the solder paste from the fridge and set it out to warm  

##At this time, retrieve the solder paste from the fridge and set it out to warm. The correct paste is labeled with a '''orange''' sticker.

##Take the board back to the Voltera

##Take the board back to the Voltera.

##Clamp the board into place.

##Clamp the board into place.

##Open the volteraapp and choose "Solder"

##Open the Voltera application and choose "Solder."

##Choose the proper paste, in this case you want the orange labeled paste

##Choose the proper paste. In this case you want the orange-labeled paste.

##'''NICK: we need to edit the gerber so that theres no solder paste on pads'''

##'''NICK: we need to edit the gerber so that theres no solder paste on pads'''

##'''Like before, clean the calibration switches'''

##'''Like before, clean the calibration switches'''