Changes

Jump to navigation Jump to search
Line 76: Line 76:  
## Set the conductive ink on the table, allowing to begin to warm to room temperature.
 
## Set the conductive ink on the table, allowing to begin to warm to room temperature.
 
# ''Software Setup''
 
# ''Software Setup''
 +
## Download the files for this project [[File:pcb_printer_level_1.zip|here]].
 
## Power on the Voltera.
 
## Power on the Voltera.
 
## Open the Voltera Windows application.
 
## Open the Voltera Windows application.
 
## Select "Print" and then "Simple."
 
## Select "Print" and then "Simple."
 
## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.
 
## Add the proper conductive ink. This is the same conductive ink you acquired in step 1.3.
## Load the ink file. This is the Top Layer Gerber file. Download it [[File:pcb_printer_level_1.zip|here]].
+
## Load the ink file. This is the Top Layer Gerber file.  
 
## Click "Next."
 
## Click "Next."
 
# ''Cleaning the Sensors''
 
# ''Cleaning the Sensors''
1,341

edits

Navigation menu