Difference between revisions of "Jointer"
Jump to navigation
Jump to search
(→Safety) |
(→Safety) |
||
| Line 61: | Line 61: | ||
* Never let your thumb or fingers hang down near the table when pushing a board through the machine. | * Never let your thumb or fingers hang down near the table when pushing a board through the machine. | ||
* Hold onto material firmly and keep it against the table and fence to help prevent material kicking back. If material catches on the blade the material can shoot back at you and this is called a kickback. | * Hold onto material firmly and keep it against the table and fence to help prevent material kicking back. If material catches on the blade the material can shoot back at you and this is called a kickback. | ||
| − | This is a video | + | This is a video showing how to safely use the jointer: |
{{#evu:https://www.youtube.com/watch?v=3d1qBxcnI0E | {{#evu:https://www.youtube.com/watch?v=3d1qBxcnI0E | ||
}} | }} | ||
Revision as of 11:39, 23 October 2019
Make: Powermatic
Model: 54HH
Ace: Needed (Makerhub@georgefox.edu).
Location: Wood Shop
Description
The Powermatic jointer contains a 1HP motor and 6" capacity that will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems. The 4" dust port connects easily to any dust collector. Used to remove material from wood, as well as squaring to create straight pieces.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Insert terminology here
Training
Overview
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
There are several hazards you need to be aware of when using a jointer.
- The cutters are very sharp and spin very fast. Keep your fingers away from the cutter head even when its not spinning. Use a push pad/stick to keep your fingers a safe distance from the cutters.
- Never let your thumb or fingers hang down near the table when pushing a board through the machine.
- Hold onto material firmly and keep it against the table and fence to help prevent material kicking back. If material catches on the blade the material can shoot back at you and this is called a kickback.
This is a video showing how to safely use the jointer:
Certification
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |