Dust Collector

From maker-hub
Jump to navigation Jump to search
Image pending.png
Small Dust Collector

Make: Laguna / JET Equipment & Tools

Model: Pflux:3 / DC-1100-A

Ace: ().

Location: Wood Shop

Description

Breathing in dust is not good for your health. The 1hp dust collector, 3hp dust collector, two overhead air filters, shop vac, and various brooms/dustpans serve to do more than just clean up messes; they keep sawdust out of the air which can cause respiratory issues and other health problems over time. Always connect a dust collector when using equipment in the woodshop. Some of the power tools can be connected to the shop vac. Especially when sanding or using the CNC router, turn on the overhead air filters to catch the really fine dust particles. Notify a shop supervisor if you see that the dust collector has filled up, the overhead air filter indicator dial is in the red, or the shop vac seems full. It's important to keep these devices running optimally to maintain good air quality in the shop.

Here is an example of this piece of equipment being used.

Documentation

Terminology

To turn on the overhead air filters, point and press "ON" with either of the white remote controls in the image to the right. Use the black remote control to turn on the large Laguna P-Flux dust collector. These remote controls live on the cabinet between the CNC router control station and the wood lathe.

User Manual Small Dust Collector

User Manual Large Dust Collector

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

Insert text

Certification

Foxtale Quiz

Troubleshooting

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Sample Sample Sample