Difference between revisions of "CNC Router"
Jump to navigation
Jump to search
| Line 61: | Line 61: | ||
==Troubleshooting== | ==Troubleshooting== | ||
| + | *If none of the control functions on the control panel appear to work, make sure the machine has been homed and the E-stop is released. | ||
| + | *If the cutting tool height appears to be incorrect make sure the tool touch off has been performed for the tool in use. | ||
==Maintenance== | ==Maintenance== | ||
Revision as of 13:29, 2 June 2020
Make: Laguna
Model: SmartShop II
Ace: Luke Roderick (lroderick20@georgefox.edu).
Location: Wood Shop
Description
The Laguna SmartShop II is a CNC wood router capable of cutting out complex shapes that would otherwise be difficult to create by hand. Like all CNC machines, the SmartShop II is most useful when a design calls for a high level of precision, or is being mass produced.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Insert terminology here
Training
Overview
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Certification
Foxtale Quiz
Troubleshooting
- If none of the control functions on the control panel appear to work, make sure the machine has been homed and the E-stop is released.
- If the cutting tool height appears to be incorrect make sure the tool touch off has been performed for the tool in use.
Maintenance
General maintenance
- The spoil board needs to be resurfaced as grooves are cut into the surface. Grooves will release a percentage of the table vacuum and increase the risk of the material moving during cutting.
- There are many bearing surfaces located on the router that need to be lubricated. The router is equipped with a central lubrication system the technician will operate on a regular basis.
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |