Power Carver

Make: Foredom

Model: SR - K5200 Deluxe

Ace: Needed (Makerhub@georgefox.edu).

Location: Wood Shop

Description

Whether you are using traditional wood carving tools or power wood carving tools, the use of any tool comes with some risk. Power wood carving tool users will improve their experience if they educate themselves about potential safety hazards, and take the proper precautions. Body Protection If a power wood carving tool can remove wood, it can also remove flesh. To keep your hands safe, always carve along the grain of the wood, and avoid trying to remove wood too quickly, which can cause the tool to slip. When using large bits, clamp your project down. Avoid loose clothing or hair, which can get caught in moving bits, and protect your clothing with a leather apron. Do not wear traditional carving gloves, as the fibers can get caught in the bit; if you must wear a glove, use a heavy leather welding glove. man wearing a dust mask and safety glassesPower wood carving creates a lot of flying particles, so it's important that eyes are protected at all times. Safety glasses with side shields will protect eyes from airborne wood particles, as well as from metal bur particles.

Dust Power wood carving releases find particles of wood dust, which can cause health issues such as asthma, allergic reactions, and even some cancers when inhaled. Carvers should always use a filtering dust mask when carving. In addition, a dust collection system pulls wood dust particles out of the air and traps them in a filter. Fire Any time dust is not properly removed and builds up, there is a fire hazard. Never allow smoking in your wood shop, and remove settled dust immediately.

Here is an example of this piece of equipment being used.

Insert video media here.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

https://www.youtube.com/watch?v=U4tdNuw4dWA

Demonstration

Insert text

General Procedure

Insert text

Safety

Remember that a carving tool that can remove wood can also remove flesh.  Keep your hands away from spinning cutters. It's good practice to carve along the grain and try to avoid removing material too quickly, which can cause the tool to slip. When working with larger tooling make sure to clamp your project down. Avoid loose clothing or hair, which can get caught in moving bits. Power carving can produce a lot of flying particles, so it's important to protect your eyes. The dust produced is not good for your lungs so avoid breathing the dust and make sure the air filters are turned on.

Certification

Foxtale Quiz

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample