Changes

#Make sure the cutting side of the blade aligns with the mark on your material.

#Make sure the cutting side of the blade aligns with the mark on your material.

#Pull down on both hold down levers and lock the material in place.   

#Pull down on both hold down levers and lock the material in place.   

#Depending on the width of cut and how much you weigh, you may need to place one or two feet on the stomp bar.  

#Depending on the width of cut and how much you weigh, you may need to place one or two feet on the foot pedal.  

#Keep your hands away from the blade.  You can hold onto the top cam lock bar to steady yourself if needed.  

#Keep your hands away from the blade.  You can hold onto the top cam lock bar to steady yourself if needed.  

#You may need to jump or press down on the foot bar to get the material to shear.   

#You may need to jump or press down on the foot pedal to get the material to shear.   

#After the material is cut you will need to remove yourself from the stomp bar.  

#After the material is cut you will need to remove yourself from the foot pedal.  

#Release the clamping levers and remove the material.     

#Release the clamping levers and remove the material.     

#Reset the space.

#Reset the space.