1,947
edits
Changes
Jump to navigation
Jump to search
Line 69:
Line 69: − + − +
→General Procedure
#Pull down on both hold down levers and lock the material in place.
#Pull down on both hold down levers and lock the material in place.
#Depending on the width of cut and how much you weigh, you may need to place one or two feet on the foot pedal.
#Depending on the width of cut and how much you weigh, you may need to place one or two feet on the foot pedal.
#Keep your hands away from the blade. You can hold onto the top cam lock bar to steady yourself if needed.
#Keep your hands away from the blade. You can hold onto the top hold down rail to steady yourself if needed.
#You may need to jump or press down on the foot pedal to get the material to shear.
#You may need to jump or press down on the foot pedal to get the material to shear.
#After the material is cut you will need to remove yourself from the foot pedal.
#After the material is cut you will need to remove yourself from the foot pedal.
#Release the clamping levers and remove the material.
#Release the hold down levers and remove the material.
#Reset the space.
#Reset the space.