Changes

*ZPO (Zero Point Offset) - The selected X and Y position on the material that coordinates with the program zero point.   

*ZPO (Zero Point Offset) - The selected X and Y position on the material that coordinates with the program zero point.   

*Collet- A piece of machined steel that clamps down and locates the cutter in the tool holder.  

*Collet- A piece of machined steel that clamps down and locates the cutter in the tool holder.  

*Dust Shroud- A combination of sheet metal and flexible brush material that performs a seal around the area of material during the cutting proba.  

*Dust Shroud- A combination of sheet metal and flexible brush material that performs a seal around the area of material during the cutting process.  

*Vacuum Pump-

*Spoil Board- A porous sacrificial board used on top of the router bed but under the work piece. 

*Vacuum Table-

*Regenerative Blower- This device produces the vacuum needed to pull material down onto the spoil board. 

*Tool Holder-

*Tool Holder-

*Straight Router Bits-

*Straight Router Bits-

*Down Shear Router Bits-

*Down Shear Router Bits-

*Combination (Compression) Router Bits-

*Combination (Compression) Router Bits-

*Tool Touch-Off-

*Tool Touch-Off- A process of setting the Z axis height of a tool using the sensor built into the machine. 

[https://860860.app.netsuite.com/core/media/media.nl?id=660566&c=860860&h=b0bfe5746d263d749d0f User Manual]

[https://860860.app.netsuite.com/core/media/media.nl?id=660566&c=860860&h=b0bfe5746d263d749d0f User Manual]