80
edits
Changes
Jump to navigation
Jump to search
Line 93:
Line 93: +
no edit summary
*If none of the control functions on the control panel appear to work, make sure the machine has been homed and the E-stop is released.
*If none of the control functions on the control panel appear to work, make sure the machine has been homed and the E-stop is released.
*If the cutting tool height appears to be incorrect make sure the tool touch off has been performed for the tool in use.
*If the cutting tool height appears to be incorrect make sure the tool touch off has been performed for the tool in use.
*If your tool path appears on the inside of your part, it is likely because the paths are not joined. To join your paths, highlight the paths you wish to join and press the j key.
==Maintenance==
==Maintenance==