User contributions
31 January 2022
27 January 2022
Acid Bath
Added to proposed deletion
+33
Tools
Replaced bad icon for punch with image pending
+3
Abrasive Blast Cabinet
Added to proposed deletion
+31
Miller Spectrum 875 Plasma Cutter
Added to proposed deletion
+32
Category:Proposed deletion
Created page with "{{#default_form:}}"
MicrochipStudio
Updated link (for real this time)
-16
Logic
Updated version
mMicrochipStudio
Updated link
+14
MicrochipStudio
Changed Atmel Studio 7 to Microchip Studio
m+4
Rework Station
Specific Maintenance Tasks: Add tasks for emptyingand replacing filter on desoldering gun
+130
Reflow Oven
Safety: Added remark about not blocking oven door
+138
PCB Printer
Specific Maintenance Tasks: Added last time maintenance was performed, removed cleaning with isopropyl as this is no longer considered best practice
-48
PCB Printer
General Procedure: Removed old info and added additional tips
-82
PCB Printer
Terminology: Added link to gerber export guide
+69
PCB Printer
Before you Print: Minor language edits
m+12
PCB Printer
Changed drill bit image size
PCB Printer
Before you Print: Moved image, added caption
+16
PCB Printer
Header/image alignment
m-92
PCB Printer
Before you Print: Added picture of available drill bits
+53
File:Voltera-drillbits.png
Set of drill bits used on the PCB Printer
PCB Printer
Terminology: Updated link from sunstone to JLC
-17
PCB Printer
General Procedure: Modified instructions on cleaning sensors to reflect current best practice of not using isopropyl, instead cleaning with dry q-tip when paste is still wet.
-346
PCB Printer
Added "Before you print" section for final checks and best practices
+838
26 January 2022
High Speed Camera
Safety: Changes to phrasing
m-11
PCB Printer
Documentation: Added link to circuit design guidelines
+82
6 October 2021
23 February 2021
16 February 2021
2 February 2021
31 January 2021
Tools
Replaced bad icon for combination wrench with image pending. Removed placeholder description and replaced with 'a' to make it stand out and be consistent with the rest of the page.
-256
Tools
Added descriptions for batman, robin, helping hands, logic analyzer, and FPGA board. Modified description for laser thermometer to include comment about shiny objects.
+754
PCB Printer
Specific Maintenance Tasks: Added items for replacing ink/paste and re-labeling dispenser
+163
PCB Printer
Terminology: Removed copy-pasted section from reflow page. Removed lot names from ink descriptions as these change frequently. Added section describing lot names.
-67
PCB Printer
Operation: Cleaned up wording
m+72
Pick and Place
General Procedure: Added turntable operation step
m+194
High Speed Camera
Troubleshooting
+2,882
The Vault
Equipment by Icon: Modified to show icons for Vault, not welding shop.
m-3
MIG Welder
Troubleshooting: Added point for inconsistent arc
+146