45
edits
Changes
Jump to navigation
Jump to search
Line 247:
Line 247: + + + + + Line 258:
Line 263: − | − |- − |Refrigerating the Dispensers − |Whenever they are not in use − |Student − |N/A − |- − |Switch Cleaning − |During Calibration stage using Isopropyl Alcohol and a giant Q-tip − |Student Line 273:
Line 268: − + − + − +
→Specific Maintenance Tasks: Added last time maintenance was performed, removed cleaning with isopropyl as this is no longer considered best practice
|General Cleaning
|General Cleaning
|Before and after each use, including ink/solder residue and drilled material
|Before and after each use, including ink/solder residue and drilled material
|Student
|N/A
|-
|Refrigerating the Dispensers
|Whenever they are not in use
|Student
|Student
|N/A
|N/A
|When the nozzle is clogged
|When the nozzle is clogged
|Student or Ace
|Student or Ace
|
|
|-
|-
|Whenever out of ink/solder paste
|Whenever out of ink/solder paste
|Ace
|Ace
|
| 01/27/2022 by MM
|-
|-
|Labeling dispenser with lot name
|Labeling dispenser with lot name
|Whenever ink/solder paste is replaced
|Whenever ink/solder paste is replaced
|Ace
|Ace
|
| 01/27/2022 by MM
|-
|-
|Cleaning calibration switch linear hardware (Disassemble, clean, oil)
|Cleaning calibration switch linear hardware (Disassemble, clean, oil)
|Once yearly, or as required.
|Once yearly, or as required.
|Ace and Technician
|Ace and Technician
|
| 01/27/2022 by MM
|}
|}