45
edits
Changes
Jump to navigation
Jump to search
mLine 73:
Line 73: +
→General Procedure: Added turntable operation step
## It would be a good idea to have a separate section for each component for organization purposes (for yourself and others).
## It would be a good idea to have a separate section for each component for organization purposes (for yourself and others).
## Use a sticky note or labeling system of some sort for different components like resistor values.
## Use a sticky note or labeling system of some sort for different components like resistor values.
## The turntable can be operated by selecting either Auto or Manual from the place menu, and then selecting Turntable. Press the left and right arrows to rotate clockwise and counter-clockwise.
# Turn on the monitor that will display the output of the micro camera. This will help you view your part while you are placing it on the pads.
# Turn on the monitor that will display the output of the micro camera. This will help you view your part while you are placing it on the pads.
# Clamp your board onto the microtable. You should not be able to move your board when it is secured.
# Clamp your board onto the microtable. You should not be able to move your board when it is secured.