Power Carver
Make: Foredom
Model: SR - K5200 Deluxe
Serial Number: I180359
Ace: Needed (Makerhub@georgefox.edu).
Location: Wood Shop
Description
The power carver consists of hand piece that is driven by a motor. The motor is connected via flexible shaft that allows easy movement of the hand piece without the weight of the motor. There are many cutting tools available for use with the hand piece. Some of the uses include sanding, carving, and cutting. The most common uses are creating custom designs in wood and polishing small projects.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Hand-Piece- The part of the power carver that attaches to the cutter.
Flex Shaft- The flexible cable that transfers the motor power to the hand piece.
Training
Operation
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
Remember that a carving tool that can remove wood can also remove flesh. Keep your hands away from spinning cutters. It's good practice to carve along the grain and try to avoid removing material too quickly, which can cause the tool to slip. When working with larger tooling make sure to clamp your project down. Avoid loose clothing or hair, which can get caught in moving bits. Power carving can produce flying particles, so it's important to protect your eyes. The dust produced is not good for your lungs so avoid breathing the dust and make sure the air filters are turned on.
Certification
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |