152 Robot

From maker-hub
Jump to navigation Jump to search


Cat Body.jpg
Cat Body

This TV is tailored for the 152 engineering class. This page will describe the steps of designing and fabricating a vacuum formed body for the 152 robot. This page will also contain links to sign up for the equipment training necessary for completing this training venture and 152 in general.







Necessary Equipment

For 152, students will need to certify on the Soldering Irons, the Electronics Workstation, the Vinyl Cutter, the Vacuum Former, and the Finishing Room. Because the Vacuum Former is located in the Vault, students will also need to pass The Vault quiz as well. Please read the wiki pages and pass the Canvas quizzes for these 6 pieces of equipment/facilities before conducting your in-person demonstrations.

Signing Up for Training/Demonstrations

Given the large number of students in 152, training and demonstrations will follow a similar format to 151.

  • Soldering Iron training will be conducted in 4 2-person teams (for a total of 8 students). Ideally, your teammate will be the same teammate you have for the robot project overall. Each 2-person team will solder one Maker Hub LED board kit in a 1-hour block.
  • Electronic Workstation training will be conducted in groups of 8 students in a 1-hour block.
  • Vinyl Cutter training will be conducted in groups of 8 students in a 1-hour block.
  • Vacuum Former and Finishing Room training will be conducted simultaneously within a 1-hour block. This training will also accommodate 8 students at a time.

Please sign up for training at the following Google Sheet:

https://docs.google.com/spreadsheets/d/1BwhbqF90DvTv4_sZq3c2Y9d1rvjpHUb6BeC_hYj_wVU/edit?usp=sharing

Procedure

The following procedure will show the process of vacuum forming and painting/decorating a PETG shell for a 152 robot. There are many ways to shape, paint, decorate, and customize your vacuum formed shell. The examples given in this training venture are intended to demonstrate some of the possibilities for how you might design and build your own vacuum formed shell. You are encouraged to use these examples as stepping stones to build even more creative and inspiring shells for your robot. Just make sure your final product is GFU appropriate.

In the example of the orange cat shell at the top of this page, I designed and 3D printed a mold for the shape. After cutting away the excess PETG plastic, I hand-painted the inside of the shell. I used stacked vinyl cutouts for the nose, mouth, and whiskers. I cut white vinyl pieces for the claws. Finally, I added the construction paper ears and googly eyes as the finishing touches. (My orange cat at home--which was the inspiration for this build--has no tail... just in case you were wondering why there's no tail)

But now we will pivot, and I will explain a second example robot shell in greater detail with pictures to show you the process.

There are several modular mold pieces that you can use to create the general shape of your robot's shell. Ask one of the 152 TAs where these modular mold pieces will be kept. You are encouraged to add extra 3D printed parts or wooden pieces or create your own custom shape for your shell. Keep in mind that the vacuum former has limits for how far you can draw down the heated plastic before it rips or begins webbing. For example, don't expect to vacuum form a 6-inch cube cleanly with zero webbing. There are creative ways to minimize webbing or stack two vacuum forms together, but this will be part of your creative discovery of how vacuum forming works.

What is webbing? See the following image. Webbing refers to the creases that form in the heated plastic as a result of internal stresses as the plastic is stretched over a mold. Webbing is more likely to occur if the plastic is overheated.


By contrast, the following image shows what happens if the plastic is underheated. Underheated plastic will not draw down enough to form the shape you are intending. Turns out that this particular shape was more difficult than expected.


The following image shows the mold I used to attempt the shape of Darth Vader's tie fighter. I used the dome-shaped 3D print mold in conjunction with a scrap piece of wood that I cut in half and modified in the wood shop. Notice that after vacuum forming, the plastic did not draw down all the way between the dome and the two wood pieces.


I drew several shapes in Inkscape that would compose the features of the tie fighter. These shapes would be cut out of a scrap piece of vinyl on the vinyl cutter and act as a mask during spray painting later in the process.


After cutting away the excess plastic and smoothing the edges of the shell, I began applying the vinyl pieces to the inside of the shell.