Difference between revisions of "Power Carver"
| Line 49: | Line 49: | ||
==Training== | ==Training== | ||
====Operation==== | ====Operation==== | ||
| + | The Foredom uses a stand that is connected to the table. You will need to clip the motor hanger bracket to the clip on the stand. This will allow the stand to carry the weight of the motor. The preferred hand piece will need to be selected and installed as well as the desired tool. The tools are captivated by the collet located inside the hand piece. To lock the shaft find the hole located on the side of the hand piece. Install the locking pin into the hole so the shaft can't turn. You will now be able to use the wrench to loosen the collet. Install the tool and reverse the process to lock the tool in place. Make sure to remove the locking pin before trying to run the motor. | ||
| − | |||
{{#evu:https://www.youtube.com/watch?v=U4tdNuw4dWA}} | {{#evu:https://www.youtube.com/watch?v=U4tdNuw4dWA}} | ||
Revision as of 10:38, 25 February 2021
Make: Foredom
Model: SR - K5200 Deluxe
Serial Number: I180359
Ace: Needed (Makerhub@georgefox.edu).
Location: Wood Shop
Description
The power carver consists of hand piece that is driven by a motor. The motor is connected via flexible shaft that allows easy movement of the hand piece without the weight of the motor. There are many cutting tools available for use with the hand piece. Some of the uses include sanding, carving, and cutting. The most common uses are creating custom designs in wood and polishing small projects.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Hand-Piece- The part of the power carver that attaches to the cutter.
Flex Shaft- The flexible cable that transfers the motor power to the hand piece.
Training
Operation
The Foredom uses a stand that is connected to the table. You will need to clip the motor hanger bracket to the clip on the stand. This will allow the stand to carry the weight of the motor. The preferred hand piece will need to be selected and installed as well as the desired tool. The tools are captivated by the collet located inside the hand piece. To lock the shaft find the hole located on the side of the hand piece. Install the locking pin into the hole so the shaft can't turn. You will now be able to use the wrench to loosen the collet. Install the tool and reverse the process to lock the tool in place. Make sure to remove the locking pin before trying to run the motor.
Demonstration
Insert text
General Procedure
Insert text
Safety
Remember that a carving tool that can remove wood can also remove flesh. Keep your hands away from spinning cutters. It's good practice to carve along the grain and try to avoid removing material too quickly, which can cause the tool to slip. When working with larger tooling make sure to clamp your project down. Avoid loose clothing or hair, which can get caught in moving bits. Power carving can produce flying particles, so it's important to protect your eyes. The dust produced is not good for your lungs so avoid breathing the dust and make sure the air filters are turned on.
Certification
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |