Power Carver

Make: Foredom

Model: SR - K5200 Deluxe

Ace: Needed (Makerhub@georgefox.edu).

Location: Wood Shop

Description

The power carver consists of hand piece that is driven by a motor. The motor is connected via flexible shaft that allows easy movement of the hand piece without the weight of the motor. There are many cutting tools available for use with the hand piece. Some of the uses include sanding, carving, and cutting.

Here is an example of this piece of equipment being used.

Documentation

Terminology

Hand-Piece- The part of the power carver that attaches to the cutter.
Flex Shaft- The flexible cable that transfers the motor power to the hand piece.

Media:K_Manual.pdf

Training

Operation

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

Remember that a carving tool that can remove wood can also remove flesh. Keep your hands away from spinning cutters. It's good practice to carve along the grain and try to avoid removing material too quickly, which can cause the tool to slip. When working with larger tooling make sure to clamp your project down. Avoid loose clothing or hair, which can get caught in moving bits. Power carving can produce flying particles, so it's important to protect your eyes. The dust produced is not good for your lungs so avoid breathing the dust and make sure the air filters are turned on.

Certification

Foxtale Course

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample