Page history
12 November 2024
22 August 2024
28 February 2024
20 February 2024
25 August 2023
21 February 2023
23 January 2023
30 September 2022
29 September 2022
11 February 2022
31 January 2022
27 January 2022
→Specific Maintenance Tasks: Added last time maintenance was performed, removed cleaning with isopropyl as this is no longer considered best practice
-48
→General Procedure: Removed old info and added additional tips
-82
→Terminology: Added link to gerber export guide
+69
→Before you Print: Minor language edits
m+12
Changed drill bit image size
→Before you Print: Moved image, added caption
+16
Header/image alignment
m-92
→Before you Print: Added picture of available drill bits
+53
→Terminology: Updated link from sunstone to JLC
-17
→General Procedure: Modified instructions on cleaning sensors to reflect current best practice of not using isopropyl, instead cleaning with dry q-tip when paste is still wet.
-346
Added "Before you print" section for final checks and best practices
+838
26 January 2022
22 July 2021
23 February 2021
31 January 2021
→Specific Maintenance Tasks: Added items for replacing ink/paste and re-labeling dispenser
+163
→Terminology: Removed copy-pasted section from reflow page. Removed lot names from ink descriptions as these change frequently. Added section describing lot names.
-67
→Operation: Cleaned up wording
m+72