2,418
edits
Changes
Jump to navigation
Jump to search
Line 45:
Line 45: − + Line 51:
Line 51: − user manual+
→Documentation
Each bit is made for a different job. The wood shop has a wide assortment, although less common types may be unavailable. It should be noted that different bit sizes and profiles will operate better at different speeds. A good rule of thumb for setting the router bit speed is: the larger the cutter the slower the speed. Usually the router table will be set to 20000 RPM. If you plan to use a larger bit and reduce the speed of the router, ask a shop supervisor for assistance.
Each bit is made for a different job. The wood shop has a wide assortment, although less common types may be unavailable. It should be noted that different bit sizes and profiles will operate better at different speeds. A good rule of thumb for setting the router bit speed is: the larger the cutter the slower the speed. Usually the router table will be set to 20000 RPM. If you plan to use a larger bit and reduce the speed of the router, ask a shop supervisor for assistance.
[[File:Router Bit Chart.jpg|500px|right]]
[[Image:RouterBits.jpg|500px|none]]
[[Image:RouterBits.jpg|500px|none]]
*Soft Start - Electronic circuit used to slow the start up speed of a motor or power tool.
*Soft Start - Electronic circuit used to slow the start up speed of a motor or power tool.
[[Media:Portamate-PM-P254-Variable-Speed-3-1-4-HP-Router-Motor-Instructions.pdf|Table Router User Manual]]
==Training==
==Training==