1,956
edits
Changes
Jump to navigation
Jump to search
Line 64:
Line 64: − +
→General Procedure
Setting up the Cut Area:
Setting up the Cut Area:
{{#evu:https://www.youtube.com/watch?v=sdsMOPZFMRQ}}
{{#evu:https://www.youtube.com/watch?v=sdsMOPZFMRQ}}
# Remove the router and from its box.
# Remove the router from its box.
# Power on the router buy plugging in the device. Do not flip the switch attached to the spindle motor to the on position.
# Power on the router buy plugging in the device. Do not flip the switch attached to the spindle motor to the on position.
# Place at least three strips of Shaper Tape slightly above the area you want to cut so that the router will be able to orient itself. They do not have to be straight line but do need to be in the same plane.
# Place at least three strips of Shaper Tape slightly above the area you want to cut so that the router will be able to orient itself. They do not have to be straight line but do need to be in the same plane.