2,442
edits
Changes
Jump to navigation
Jump to search
→Safety
Line 115:
Line 115:
+
* Be careful what you touch; the nozzle and filament leaving it are over 200°C which will easily cause burns. Although only 60°C, the build plate should not be touched during printing.
* Be careful what you touch; the nozzle and filament leaving it are over 200°C which will easily cause burns. Although only 60°C, the build plate should not be touched during printing.
* Keep hands away from the travel rods because they will pinch fingers with ease.
* Keep hands away from the travel rods because they will pinch fingers with ease.
−* Support material can be sharp so be careful when removing it.
+* Support material can be sharp so be careful when removing it.
+==Approved Filaments==
+* PLA
== Certification ==
== Certification ==