2,418
edits
Changes
Jump to navigation
Jump to search
Line 83:
Line 83: + + − Note:+ − # Adjust the temperature with the regulator 2. The table on the front of the device serves+ − as a guide. The best way to find the ideal temperature is to try different temperatures yourself. For simple, straightforward cuts you use a high temperature, for complicated shapes a lower temperature. Please note that too high temperatures will cause untidy edges. − # Now move the workpiece through the wire with a light pressure and even speed. Be aware that too high pressure in the direction of the cut when cutting complicated shapes will tend to bend the wire.
→Operation
''Cutting''
''Cutting''
# Switch on the device with the switch 1(Fig. 1).
# Switch on the device with the switch 1(Fig. 1).
# Adjust the temperature with the regulator 2. The table on the front of the device serves as a guide. The best way to find the ideal temperature is to try different temperatures yourself. For simple, straightforward cuts you use a high temperature, for complicated shapes a lower temperature.
# Now move the workpiece through the wire with a light pressure and even speed. Be aware that too high pressure in the direction of the cut when cutting complicated shapes will tend to bend the wire.
Notes:
It is normal that the wire extends somewhat after being heated for the first time. Stretch the wire slightly by the first heating and tension it again. The wire will now retain its length.
It is normal that the wire extends somewhat after being heated for the first time. Stretch the wire slightly by the first heating and tension it again. The wire will now retain its length.
Please note that too high temperatures will cause untidy edges.
====Demonstration====
====Demonstration====