2,405
edits
Changes
Jump to navigation
Jump to search
Line 90:
Line 90: − + + + + + + + + + + +
no edit summary
<br>
<br>
<br>
<br>
<strong>Step 17:</strong>
<strong>Step 17:</strong> In the design tree, drop down the arrow on the revolve to reveal the nested sketch. Click on the sketch and select the eyeball icon to make it visible. On the Features tab, select Reference Geometry and click on Plane. For the First Reference, you can drop down the design tree in the top left of your workspace and select the Right Plane. Set the offset distance to 24mm and click the green checkmark when you are finished.
37
<br>
<br>
<strong>Step 18:</strong> In the design tree, right click on the plane and select the sketch icon. Draw a circle on the plane and make its center point coincident with the point on the side of your egg as shown in the screenshot below. To make these two points coincident, hold shift and click on both the center point of the circle and the point on the side of the egg. Then use the Add Relations section to make them coincident. Use the Smart Dimension tool to set the diameter of the circle to 2mm.
38
<br>
<br>
<strong>Step 18:</strong>