1,956
edits
Changes
Jump to navigation
Jump to search
Line 154:
Line 154: − +
→Reset the Space
==== Reset the Space ====
==== Reset the Space ====
When you have finished, part the cutting tool back into the tool rack at the end of the table. You will need to remove any material on the table and vacuum off the top using the dust collector or portable vacuum. Make sure to disconnect the air hose and power down the machine with the spindle located off of the table.
When you have finished, park the cutting tool back into the storage rack at the end of the table. You will need to remove any material on the table and use the vacuum to clean off any leftover dust and chips. You can use the dust collector or portable vacuum. Make sure to disconnect the air hose and power down the machine with the spindle located off of the table. This will prevent any leaking oil from dripping on the table.
==Safety==
==Safety==