1,962
edits
Changes
Jump to navigation
Jump to search
→General Procedure
Line 59:
Line 59:
Insert text+
====General Procedure====
====General Procedure====
−# You will need to find a piece of scrap sheet metal larger than the punch you want to use. The material will also need to be large enough to hold onto.
+# Drill a hole roughly 1/16" in the location of where you want the center of the punch to be.
+# Make sure the handle of the punch is up and rotate the top carousel to the desired punch.
+# Lift the locking handle and rotate the bottom carousel to the matching letter.
==Safety==
==Safety==