Changes

Jump to navigation Jump to search
Line 57: Line 57:     
====General Procedure====
 
====General Procedure====
[[File:TABLE_SAW_CONTROLS.jpg|none|thumb|600x600px]]
      
#Adjust the radius by turning the knobs on the back of the machine. This adjusts the distance between the rollers.
 
#Adjust the radius by turning the knobs on the back of the machine. This adjusts the distance between the rollers.
Line 66: Line 65:  
#Slowly rotate the handle until you have rolled to the desired radius. If the initial radius is not the desired radius, re-roll at a slightly tighter radius.
 
#Slowly rotate the handle until you have rolled to the desired radius. If the initial radius is not the desired radius, re-roll at a slightly tighter radius.
 
#Unlock the top roller to slide your rolled metal off the end of roller.
 
#Unlock the top roller to slide your rolled metal off the end of roller.
      
==Safety==
 
==Safety==
1,953

edits

Navigation menu