Changes

# Open the software you wish to print from (Adobe or Inkscape software).  

# Open the software you wish to print from (Adobe or Inkscape software).  

# Create or open your desired design.   

# Create or open your desired design.   

# Power on the SG400 printer and give it some time to power up. The printer can take several minutes to warm up.       

# Power on the SG400 printer and give it some time to power up. The printer can take several minutes to warm up.       

# You need to open either Adobe or Inkscape software depending on your preference.

# You need to open either Adobe or Inkscape software depending on your preference.

# Open the image you wish to print.

# Open the image you wish to print.

# Make sure the image is a mirrored if you want to read the text on a surface or keep the image direction correct.     

# Make sure the image is a mirrored if you want to read the text on a surface or keep the image direction correct.     

# Make sure the image size is smaller than the size of paper you are printing on. The largest size paper is 8.5" x 11."  

# Make sure the image size is smaller than the size of paper you are printing on. The largest size paper is 8.5" x 11."  

# You will need to select print and make sure you are printing to the Sawgrass 400 printer.     

# You will need to select print and make sure you are printing to the Sawgrass 400 printer.     

# The printer should start printing and produce a sheet of paper with your image on it.   

# The printer should start printing and produce a sheet of paper with your image on it.   

# You will need to setup the heat press to complete your image transfer.

# You will need to setup the heat press to complete your image transfer.