Changes

# Do NOT plane to a thickness less than 3/8”.

# Do NOT plane to a thickness less than 3/8”.

# Listen to the sound the planer makes as it’s operating. If something doesn’t sound right, turn the Thickness Planer off and notify the shop aid.

# Listen to the sound the planer makes as it’s operating. If something doesn’t sound right, turn the Thickness Planer off and notify the shop aid.

# Thickness is the only adjustment that should be made while the planer running. The machine should be off before making any other adjustments.

# Planing thickness is the only adjustment that should be made while the planer running. The machine should be off before making any other adjustments.

# When finished working with the Thickness Planer, turn the machine off and remain in the work zone until it stops moving.

# When finished working with the Thickness Planer, turn the machine off and remain in the work zone until it stops moving.

# Clean off the infeed table so that the next users’ stock will be able to make contact directly with the table instead of being raised up slightly by the chips left after you’re finished planing.

# Clean off the infeed table so that the next users’ stock will be able to make contact directly with the table instead of being raised up slightly by the chips left after you’re finished planing.