80
edits
Changes
Jump to navigation
Jump to search
→Detailed Procedure
Line 86:
Line 86:
The software used in conjunction with the CNC router is VCarve Pro and may be found on the eight rolling computers in the [[The Hub]]+ +==== Toolpaths ====+
=== Software ===
=== Software ===
−VCarve Pro is the software used in conjunction with the CNC router and may be found on the eight rolling computers in the [[The Hub]].
==== Job Setup ====
==== Job Setup ====
+# Select the appropriate job type: single or double sided.
+# Enter the size of your work-piece.
+# Set the Z Zero Position to "Machine Bed." The Smart Shop II machine is calibrated for this setting. If you use the material surface option, the end-mill will carve into the machine bed causing damage and potential injury.
+# Select the XY Datum Position. Typically, it is easiest to not use an offset and origin your part off the bottom left corner of the material. If you are cutting a part that needs to be rotated and cut in 2 or more orientations an offset may be useful to line up your jig.
+# If you wish, you may adjust the modeling resolution and color. Otherwise select OK.
==== Vectors ====
==== Vectors ====
−# To Import the design you wish to cut go to File>Import>Import [your file type] and find your design.
−# Select your design and use the arrow keys to position it to the desired location.
+#
==== Final Steps ====
==== Final Steps ====