Changes

# To save the inside cutout tool path, select Calculate and OK.

# To save the inside cutout tool path, select Calculate and OK.

# Select "preview selected tool path" to ensure the path is correct.

# Select "preview selected tool path" to ensure the path is correct.

# Switch back to the 2D view and begin the process for cutting out your logo or design. This starts by holding down the shift key and selecting the items.

# Switch back to the 2D view and begin the process for cutting out your design. This starts by holding down the shift key and selecting the items.

# Select VCarve, and make sure the settings are correct. If you are satisfied, select Calculate and OK again. You can preview this part of the process as well.

# Select VCarve, and make sure the settings are correct. If you are satisfied, select Calculate and OK again. You can preview this part of the process as well.

# Go back to the 2D view to begin the outside cutout process.

# Go back to the 2D view to begin the outside cutout process.

* Stay behind the safety line when operating the router. The router is very large and will not stop if you get in its way.   

* Stay behind the safety line when operating the router. The router is very large and will not stop if you get in its way.   

* Materials need to be securely fastened to the table by vacuum or mechanical means.

* Materials need to be securely fastened to the table by vacuum or mechanical means.

* Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter.  This will compress the chips and can create a fire due to the air draw of the vacuum table.

* Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter.  This will compress the chips and can create a fire due to the air draw of the vacuum table.

* Always wear ear protection when operating the CNC router.

* Always wear ear protection when operating the CNC router.