80
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 66:
Line 66:
# To start a new project, you must first select “Create a new file.”
# To start a new project, you must first select “Create a new file.”
# Next, you will be prompted to input the width, height, and thickness of the material you are using. Click Ok to move on to the next step.
# Next, you will be prompted to input the width, height, and thickness of the material you are using. Click Ok to move on to the next step.
+# Triple check that the Z Zero Position is set to "Machine Bed." This machine is calibrated for this setting. If you use the material surface option, the end-mill will carve into the machine bed causing damage and potential injury.
# Now select "import vector".
# Now select "import vector".
# Make sure all the imported pieces are close together, but make sure they don't overlap.
# Make sure all the imported pieces are close together, but make sure they don't overlap.